Must-Read Before Bulk Purchasing Shower Mixers: Features Overview and Usage Guide
Water volume and water temperature are key factors in determining the user's showering experience.And there is an accessory in the shower room that can realize these two functions by adjusting the ratio of hot and cold water - this is the mixing valve.This article will take you a comprehensive understanding of the structure of the shower mixing valve, materials, parameters, installation and maintenance points and other basic and important information, and for you to purchase the shower mixing valve to provide the most effective reference.
Shower Mixer Structures and Materials
Valve Body——Brass
1.Corrosion resistant
2.High temperature resistance
3.Long-lasting
Valve Core——Ceramic / Plastic
1.Ceramic: wear-resistant, high temperature resistant, less likely to accumulate scale, maintains precise control for a long time
2.Plastic: low cost, suitable for projects with limited budgets
Cover + Handle——Zinc alloy / Plastic
1.Zinc alloy: Corrosion and abrasion resistant
2.Plastic: Oxidation resistant, lightweight and labor saving
Connector——Stainless steel / Copper
1.High temperature resistance
2.Corrosion resistant
3.Good sealing, not easy to leak
External decorative layer——Electroplating
1.Easy to scrub and maintain, good for maintaining the appearance of the surface finish
2.Resistant to corrosion and oxidation, which helps to enhance the durability of the surface.
Shower Mixer Types and Parameters
Port Quantity
| Types | Port Quantity | Functions | Features |
| Single-handle shower mixer | 2 ways and more | Cold water, hot water, water volume, 3-in-1 control | 1.Most commonly used in simple shower systems
2.Simple and compact, saving floor space
3.Easy to understand, user-friendly and quick to control
4.The newest single handle also enables switching between multiple outlets |
| Dual-handle shower mixer | 2 or 3 ways | 1.Independent control of cold and hot water
2.Outlet for switching water flow | Possibility to control two outlets of the shower system, e.g. shower head and hand shower |
| Triple-handle shower mixer | 3 or 4 ways | 1.Cold water, hot water independent control
2.Switching different outlets
3.Possibility of adjusting special functions (water flow or pressure, etc.) | Independently control multiple outlets and functions of a complex shower system. |
Center Distance
The standard sizes are 100mm, 125mm, and 145mm, but custom sizes can also be made according to your specific needs. The choice of size depends on the existing pipe connections. When measuring, make sure the distance between the hot and cold water pipes aligns with the center-to-center distance of the shower mixer.
Shower Mixer Installation and Maintenance
Installation
1.Check Installation Location:
The shower mixer valve is typically installed at the junction of the water pipes. Ensure that the pipe positions are accurate and leave enough space for pipe connections. Common installation locations include within the wall or above the wall surface. The exact position should be adjusted based on the bathroom layout.
2.Connect Hot and Cold Water Pipes:
Connect the hot and cold water pipes to the corresponding ports of the mixer valve, ensuring the connections are secure to prevent leaks.
● Threaded Connection:
Tighten the threads of the valve and pipe port, reinforcing with sealing tape or sealant.
● Barbed Connection:
Suitable for flexible hoses or tubing. Insert the hose and secure it with a clamp.
3.Install the Valve Core and Handle
4.Test Water Flow and Temperature
Maintenance
| Fault Type | Possible Causes | Solutions |
| Poor water flow | Water scale build-up | Use a specialized cleaner and a soft brush to regularly clean the scale buildup inside the valve and pipes. |
| Difficult rotation | Lack of lubrication on the handle | Use lubricant to maintain the handle and the moving parts of the valve (be careful to avoid contact with the valve core and pipes to prevent contamination of the water quality). |
| Inaccurate temperature | Aging or damaged valve core | Replace the valve core. |
Leakage issue | Aging seals or loose connections | Replace the seal and tighten the connections. |
Shower Mixer Expert
Hydrorelax has over 20 years of experience in the professional customization, production, and supply of high-quality shower mixers. If you still have any questions after reading this article and are considering bulk purchases, feel free to contact us for further inquiries.
In addition, we are also a professional manufacturer and supplier of other shower room accessories, with a comprehensive product portfolio covering the entire industry. Whether you are looking for suitable products or complete accessory solutions, you are welcome to send us your inquiry anytime.
2/3/4/5 ways
Material: brass & ABS
3 in a set