24/7 Hotline: +86 136 0571 4151
Home > FAQ > Pumps >

Why won’t my pump fill with water(prime)?

Why won’t my pump fill with water(prime)?
Update Time:2015-07-30
 

Therecould be an air leak on the suction side of the pump.

Checkto make sure the suction line is free of obstructions.

Checkto make sure the impeller is still attached to the shaft of the motor. If theimpeller has broken off, it will need to be replaced.

If thepump is installed at a distance from the pool or is elevated above the normaldeck level, the time needed to prime the pump could be

longer. For elevatedinstallations, a check valve may be needed on the suction line to allow foreasier priming.

 
Please send your message to us
*We will reply your inquiry to this Email as soon as we see it
*Email
Tel
*Title
*Content

Agree to use terms of service

Contact Person
Jonny Wei
leave a message:
Contact Now
Address:
418 Modern Imagic Mansion East Tower, Wenhui Road, Hangzhou 310004 China. , Hangzhou , Zhejiang.